TM 5-3805-258-24-1
9. Inspect the drain plug seal. Replace
the seal, if it is damaged. Clean and install
the tank drain plug.
11. Start the engine. Operate the
controls to circulate the oil.
10. Fill the tank. See the “Refill
Capacities” chart under “Fuel, Coolant, and
Lubricant Specifications.” Install the fill
cap.
12. Observe the sight gauge. Add oil, if
necessary, to bring the oil level above the
ADD mark.
13. Inspect the filler cup seal.
Replace seal if damaged. Install
cap.
1-80
