TM 5-3805-258-24-1Every 2000 Service Hours or 1 YearWARNINGWhen using pressure air, wear a protectiveface shield and protective clothing. Themaximum air pressure must be below 205kPa (30 psi) for cleaning purposes.WARNINGUse all cleaning solutions with care.4. Install a 1 inch NPT pipe nipple(Caterpillar part number 6B3156) to unseatthe drain valve.CAUTIONInstall the drain pipe nipple only finger tightuntil the oil starts to drain. Do NOT force thepipe nipple into the valve. This will damagethe drain valve and cause leakage.5. Allow theelement, seeunder “EveryMonths.”oil to drain. Change the filterthe topic “Hydraulic System”500 Service Hours or 37. Clean the fill screen in a clean,nonflammable solvent. Shake or blow dry.6. Remove the fill screen.8. Install the fill screen.1-79
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business