ENGINEo
TM 5-3805-258-24-2
5.
6.
DISASSEMBLY AND ASSEMBLY
RADIATOR AND HYDRAULIC OIL COOLER
Models 950BNSCE and 950BSCE
Put liquid soap inside the holes of seals (5).
Install bracket (6) to each of the end cores.
Do not tighten the bolts. Install core (7) and
install the bolt that holds bracket (6) to the
channel.
Install the next core (7) with the bevels
together as shown.
Install strap (8) that holds the cores together.
7.
Do not tighten the bolts.
8. Install the remainder of cores (7) in the
bottom tank with the bevels together. Con-
nect the cores with straps (8). Do not tighten
the bolts. Make sure bracket (6) is installed
on the other end core.
NOTE: Put the liquid soap on the seals just
before assembly.
9. Put
(9).
(9).
liquid soap on the sealing areas of seals
Put liquid soap inside the holes of seals
Put seals (9) on the cores.
5-48k
