TM 5-3805-258-24-2
POWER TRAIN
DISASSEMBLY AND ASSEMBLY
TIRES AND RIMS
REMOVE TIRES AND RIMS
4202-11
Tools Needed
A
B
8S7621
Tube
2
8S7630
Stand
2
8S7615
Pin
2
2
8S7640
Stand
2
8S7611
Tube
2
WARNING
No clearance for man in this area when turning
vehicle. When machine is to be lifted, tran-
sported on another vehicle or service work
being performed near center of machine, con-
nect anti-pivot link between front and rear
frames to keep machine in straight ahead posi-
tion. Before operation and when operating, be
sure anti-pivot link, located near lower center
of machine, is disconnected and pinned to re-
taining plates.
1. Lift the rear of the machine so the tires are off
the ground and install tooling (A) under the
rear frame.
2. Put wood blocks (1) between the rear axle
housing and frame on each side of the machine
to hold the axle housing in position when the
tires and rims are removed.
3. For the removal of the front tires and rims put
wood blocks behind the rear tires. Lift the front
of the machine so the tires are off the ground
and install tooling (B) under the loader frame
as shown.
4. Fasten a hoist to tire and rim (2). Remove the
nuts and washers that hold the tire and rim to
the wheel assembly. Remove tire and rim (2)
from the machine. The weight of each tire and
rim is 544 kg (1200 lb.).
5-164
