TM 5-3805-258-24-2
POWER TRAIN
DISASSEMBLY AND ASSEMBLY
TRANSMISSION OIL PUMP
6. Remove four dowels (9) if necessary from body
(8).
7. If necessary, remove bearings ( 10) from mani-
fold (3).
ASSEMBLE TRANSMISSION
OIL PUMP
3153-16
Tools Needed
A
1P510
Driver Group
1
1. Use tool group (A) and a press to install bear-
ings (2) in manifold (3) until they are 1.5 ± 0.5
mm (.059 ± .020 in.)below the surface of man-
ifold (3). Make sure the bearing joints are 30°
± 15° from the centerline toward oil passage
(1) as shown.
Install. the four dowels (5) in body (4) until they
extend 5.0 ± 0.5 mm (.197 ± .020 in.)above
the surfaces of the body.
5-215
