TM 5-3805-258-24-2VEHICLE SYSTEMSDISASSEMBLY AND ASSEMBLY19.20.21.22.23.24.25.PILOT AND HYDRAULIC PUMPInstall cartridge assembly (9) on the shaft as-sembly.Make an alignment of the dowels in the car-tridge and the holes in the housing. Installhousing (24) on the body.Install the bolts that hold the housing to thebody and tighten them ot a torque of 203 ± 14N-m (150 ± 10 lb. ft.).Do Steps 1 through 10 again for the assemblyof cartridge (25).Install cartridge (25) in the cover group asshown.Install seal ring (27) and O-ring seal (26) in thebody.Install body (28) on the cover group. Install thebolts and tighten them to a torque of 95 ± 7N-m (70 ± 5 lb. ft.).5-405
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business