TM 5-3805-258-24-2
VEHICLE SYSTEMS
HYDRAULIC TANK
6. Remove cap assembly (7) and the strainer from
the filler assembly.
7. Remove O-ring seal (8) from the filler assem-
bly.
8. Remove gasket (9), plate (10) and the ball from
cap (7).
9. Remove bolts (11) slowly and evenly to release
the spring tension.
10. Remove plates (12), flanges (13), tube assem-
blies (14), the springs and the valves from each
base.
11. Remove the bolts (on the back side of the tank
assembly), then remove bases (15).
12. Remove pin (16) and remove rod (17) from
both the base assemblies.
13. Remove O-ring seals (18) from both the base
assemblies.
5-418
DISASSEMBLY AND ASSEMBLY
