VEHICLE SYSTEMSTM 5-3805-258-24-2DISASSEMBLY AND ASSEMBLY16.17.18.19.HYDRAULIC TANKRemove bolts (19) and remove plate (20) andthe O-ring seal from the tank assembly.Remove the bolts (from the back side of thetank assembly), then remove manifold (21) andblock (22) from the tank assembly.Remove the O-ring seals from the back side ofthe manifold and block.Remove the bolts (from the back side of thetank assembly), then remove blocks (23) and(24) from the tank assembly.NOTE: On models 950BNSCE and 950BSCE,nuts and washers on welded studs are used inplace of bolts (25).Remove bolts (25), body (26), the guide,spring, valve and the seal from the cover assem-bly.For models 950BNS and 950BS only, removethe bolts (from the back side of the cover as-sembly) and remove block (27) from the coverassembly.5-419
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business