TM 5-3805-258-24-2
VEHICLE SYSTEMS
DISASSEMBLY AND ASSEMBLY
HYDRAULIC TANK
5. For models 950BNS and 950BS only, install O-
ring seals (8) on block (9. Install block (9) on
the-cover assembly.
6. Install O-ring seal (15) on plug (16) and install
O-ring seal (13) on body (14).
7. Install plug (16) on body (14) and tighten to a
torque of 68 ± 7 N•m (50 ± 5 lb.ft.).
8. Install spring (11) and valve (12) on guide (10).
NOTE: Welded studs, nuts and washers are
used in place of bolts on models 950BNSCE
and 950BSCE.
9. Install guide assembly (17) and body assembly
(18) on the cover assembly.
10. Install the O-ring seals on block (19) and O-
ring seals (20) on block (21).
11. Install blocks (19) and (21) on the tank assem-
bly.
5-421
