TM 5-3805-258-24-2
VEHICLE SYSTEMS
HAND
14. Install O-ring seal (26) on the cap.
15. Put cap (25) in position on the gerotor assem-
bly.
NOTE: The bolts that hold the cap and gerotor
assembly to the pump body must be dry when in-
stalled.
16. Install the bolts that hold the cap and gerotor
assembly to the pump body. Tighten the bolts
as follows:
a)
b)
a)
Tighten the bolts in number sequence to a
torque of 14 ± 3 N.m (10 ± 2 lb.ft.).
Tighten the bolts again in number sequence
to a torque of 28 ± 3 N.m (21 ± 2 lb. ft).
end by:
install hand metering pump
DISASSEMBLY AND ASSEMBLY
METERING PUMP
5-440
