TM 5-3805-258-24-2
VEHICLE SYSTEMS
DISASSEMBLY AND ASSEMBLY
HAND METERING PUMP
REMOVE HAND METERING PUMP
4312-11
start by:
a) connection of anti-pivot link
1. Remove the bolts and shroud (1) from the bot-
tom of the cab.
2. Put identification on lines (2) for assembly pur-
poses.
3. Disconnect lines (2) from hand metering pump
(3).
4. Loosen bolts (4) and remove hand metering
pump (3).
INSTALL HAND METERING PUMP
4312-12
1. Put hand metering pump (1) in position. Make
an alignment of the splines on the shaft and the
splines in the pump.
2. Connect lines (2) to the hand metering pump.
3. Install the shroud on the bottom of the cab.
end by:
a) separation of anti-pivot link
5-435
