TM 5-3805-258-24-2
VEHICLE SYSTEMS
DISASSEMBLY AND ASSEMBLY
PARKING BRAKE CHAMBER
7. Install tooling (A) on the brake chamber as-
sembly.
8. Tighten the nut and make a compression of
spring (6).
9.
10.
11.
12.
12a.
13.
Install plate (8) and bolts (9). Tighten bolts to
17 ± 3 N-m (13 ± 2 lb.ft). Remove tooling (A)
from the brake chamber.
Put stud (10) in position in brake chamber
(11).
Install nut (12), jam nuts (14) and yoke (13) on
the stud.
For models 950BNS and 950BS, put plate (15)
in position and install the four screws that
hold the plate in place.
For models 950BNSCE and 950BSCE, install
fiction-fit plug.
Install brake quick release valve (16) on the
parking brake chamber.
end by:
a) install parking brake chamber
5-453
