TM 5-3805-258-24-2VEHICLE SYSTEMSDISASSEMBLY AND ASSEMBLYLOADER MAIN FRAMESModels 950BNS and 950BS9 .Install lower bearing cup (7) in the lower hitchof the rear frame as shown. If necessary use tool(C).10. Install lower bearing cone (10), spacer (9) andupper bearing cone (8) in the lower hitch of therear frame as shown. If necessary use tool (C).11. Install upper bearing cup (11) in the lowerhitch of the rear frame. If necessary use tooling(C).1 2 .Install upper cap (5) and three bolts (12) thatare even spaces apart as shown. Tighten thebolts evenly to a torque of 87 N•m (65 lb. ft.).Make sure that lower cap (6) is even with theframe. Measure the gap between upper cap (5)and the frame at the bolts with feeler gauge(13).5-470
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business