VEHICLE SYSTEMS
24.
25.
26.
LOADER MAIN FRAMES
Models 950BNS and 950BS
Make sure bolts (26) are 180° apart and
tighten them to a torque of 135 N•m (100
lb.ft.).
Use a feeler gauge (13) to measure the gap
around 360° and between cap (25) and the
frame.
Install shims (27) of the minimum measure-
ment found in Step 25 minus 0.25 mm (0.010
in.).
27. Put lower cap (25) in position on the hitch.
28. Install bolts (26) that hold cap (25) and the pin
together.
29. Install bolts (28) that hold cap (25) to the
frame.
30. Make an alignment of steering cylinders (29)
with the front frame.
TM 5-3805-258-24-2
DISASSEMBLY AND ASSEMBLY
31. Install pins (30) that hold the cylinders to the
frame.
5-473
