OPERATOR’S STATION
SEAT
REMOVE SEAT
7312-11
1. Remove four bolts (1) from the seat platform.
2. Fasten a hoist to the seat or use two persons
and remove seat (2) from the cab. The weight
of the seat is 52 kg (115 lb.).
I N S T A L L
S E A T
73 1 2 - 1 2
TM 5-3805-258-24-2
DISASSEMBLY AND ASSEMBLY
1. Fasten a hoist to the seat or use two persons to put
seat (1) in position in the cab.
2. Install the four bolts that hold the seat to the
platform.
DISASSEMBLE SEAT
7312-15
1. Disconnect springs (1) (one on each side of the
seat) from the bar.
2. Put the back cushion assembly in position as
shown. Remove bolts (3) (one from each side of
the cushion assembly) and loosen screws (4).
3. Remove cushion assembly (2) and plate assem-
blies as a unit from the bracket assemblies.
5-476m/5-476n (blank)
