TM 5-3805-258-24-2
OPERATOR’S STATION
SEAT
11. Remove locknuts and washers (16). Remove
bracket assemblies (15) from the suspension
group.
NOTE: Earlier models have retainers in place of the
locknuts and washers. It is necessary to destroy the
retainers to remove them.
12.
13.
14.
Remove pin (17) from the latch assembly.
Remove lever (18). Remove latch assembly (19)
and spring (20).
If necessary, because of wear or damage, remove
cap (21) from the lever.
WARNING
Serious personai injury can be the result if
spring force is not carefully released when
springs are disconnected from the housing
assembly.
15. Use a screwdriver to disconnect springs (22)
from the housing assembly.
DISASSEMBLY AND ASSEMBLY
5-478
