TM 5-3805-258-24-2
ENGINE
DISASSEMBLY AND ASSEMBLY
TORQUE CONVERTER OIL COOLER
—
7. Clean the tubes of the transmission oil cooler
with a 3.175 mm (.125 in.) diameter rod (13) as
shown.
INSTALL TRANSMISSION OIL
COOLER
1366-12
1.
2.
3.
4.
5.
6.
Clean all gasket surfaces.
Install the gasket and bonnet (1) on the trans-
mission oil cooler.
Put gasket (2) and transmission oil cooler (3)
into position on the engine with the bolts that
hold it.
Connect the bracket that holds the transmis-
sion oil cooler to the oil pan.
Install the seals, flange (5) and tube assembly
(4) as shown.
Make sure seals are in position and connect the
flange and tube assembly (6) to the transmis-
sion oil cooler.
5-38
