TM 5-3805-258-24-2
ENGINE
DISASSEMBLY AND ASSEMBLY
RADIATOR, OIL COOLER AND GUARD
Models 950BNS and 950BS
7. Connect wire harness (9) and connect the clip
that holds wire (10) to the bottom of the guard
assembly.
8. Move hose (11) into position on the elbow and
tighten the clamps.
9. Move the hoses on to tube assemblies (12) and
(13) and tighten the clamps.
10. Move clamp (14) into position and tighten the
bolt.
11. Move hose (15) on to pipe (16) and tighten the
clamps.
end by:
a) install hood
5-42
