ENGINE
RADIATOR
15.
16.
17.
18.
19.
20.
21.
22.
23.
24.
TM 5-3805-258-24-2
DISASSEMBLY AND ASSEMBLY
AND HYDRAULIC OIL COOLER
Models 950BNS and 950BS
Remove the bolts and panel (11) from the ra-
diator guard.
Loosen the bolts and nuts (12) and slide panel
(13) away from the radiator assembly.
Install a 5/8”-l1 NC forged eyebolt (15) and a
hoist on radiator assembly (16) as shown.
Remove bolts (14) from the four corners of the
radiator guard.
Make sure strips (17) both top and bottom are
pulled away from radiator assembly (16).
Remove radiator assembly (16) from the ma-
chine. The weight of the radiator assembly is
197 kg (435 lb.).
Put the radiator assembly on blocks as shown.
Remove the bolts and guard (18) from the
radiator assembly.
Remove bolts (21) and the bracket from the
radiator assembly.
Remove bolt (19) and hydraulic oil cooler (20)
from the radiator assembly. The weight of the
hydraulic oil cooler is 23 kg (50 lb.).
5-45
