Put hydraulic oil cooler

TM-5-3805-258-24-2 Loader Scoop Type DED 4x4 Articulated Frame Steer 2 1/2 Cubic Yard Bucket (CCE) Airborne/Airmobile Sectionalized and Nonsectionalized Manual
Page Navigation
76

TM 5-3805-258-24-2 ENGINE RADIATOR DISASSEMBLY AND ASSEMBLY AND HYDRAULIC OIL COOLER Models 950BNS and 950BS INSTALL RADIATOR AND HYDRAULIC OIL COOLER 1353 & 1374-12 OTC Model 1790 Transmission Jack 1 1. 2. 3. 4. 5. 6. 7. Put hydraulic oil cooler (3) in position on the radiator assembly and install bolt (1) and bracket (4) that hold it. Install guard (2) on the radiator assembly as shown. Install 5/8”-11 NC forged eyebolt (6) and a hoist on radiator assembly (7) as shown. Put radiator assembly (7) in position in the radiator guard and install bolts (5) in the four corners to hold it in place. Move plate (8) against the radiator assembly and tighten the bolts and nuts. Install plate (9) on the radiator guard. Make sure the gasket is in position and connect elbow (10) to the bottom of the radiator. 5-46

Privacy Statement
Press Release
Contact