ENGINE
RADIATOR AND HYDRAULIC
Models 950BNS and 950BS
8. Make sure the gasket is in position and connect
elbow (11) to the radiator.
9. Install tube assemblies (12) and (13) in the
hoses and tighten the clamps.
10. Put the O-ring seal in position on tube assembly
(12) and connect it to the hydraulic oil cooler.
11. Install plate (14) on the radiator guard.
12. Install side panel (15) on the radiator guard as
shown.
TM 5-3805-258-24-2
OIL
5-47
