TM 5-3805-258-24-2
DISASSEMBLY AND ASSEMBLY
ENGINE
RADIATOR AND HYDRAULIC OIL COOLER
Models 950 BNSCE and 950BSCE
INSTALL RADIATOR AND HYDRAULIC
OIL COOLER
Tools Needed
A
1.
2.
3.
4.
5.
6.
7.
Install a 5/8” - 11 NC forged eyebolt (17)
and a hoist on radiator assembly (18) as
shown.
Install radiator assembly (18) onto the
machine. The weight of the radiator assembly
is approximately 225 kg (500 lb.).
Make sure strips (20) both bottom and top
are in position on radiator assembly (18).
Install bolts (19) onto the four corners of
the radiator.
Slide panel (16) onto the radiator assembly.
Install bolts and nuts (15).
Install hose (14) onto machine and tighten
clamps (12) and (13).
Install hose (11) onto machine and tighten
clamps (9) and (10).
OTC Model 1790 Trans. Jack
1
5-48d
