TM 5-3805-262-10
3-9. REMOVAL AND INSTALLATION (CONT)
a. Transport/Service Link (Cont).
(2)
To move transport/service link to operating or released position:
(a)
(b)
(c)
(d)
(e)
(f)
Remove two clips securing pins in position.
Remove two pins.
Remove transport/service link.
Position transport/service link
between welded block on rear
chassis and welded bracket just
to side of and below hydraulic
cooler on rear chassis.
Install two pins.
Install two clips on pins.
Be sure transport/service link is disengaged before driving vehicle.
Failure to do so could cause serious injury or death due to loss of
steering control.
Before performing any loader maintenance that requires servicing in area
between front and rear chassis, be sure that transport/service link is
engaged. Failure to do so could cause serious injury or death due to
chassis pivoting and crushing you when you are working in area between
front and rear chassis.
3-46
