TM 5-3805-262-10
3-8. SERVICING (CONT)
a. Air Cleaner (Cont).
(2)
Element Assemblies Servicing (Cont).
(i)
Clean vacuator valve using general purpose detergent. Dry using clean
cloth.
(j)
Using a clean cloth dampened with water and general purpose detergent,
wipe inside of air cleaner body. Dry using clean, dry cloth.
(k)
Reinstall vacuator valve on air cleaner body.
(l)
Install secondary element assembly; secure using nut assembly.
(m)
Install primary element assembly; secure using nut assembly.
(n)
Install cover assembly and tighten cover wingnut securely.
(o)
Press reset button on top of restriction indicator and check that red
band disappears from view. Crank engine and check if restriction indi-
cator red band comes into view. If red band is in view, repeat steps
(2)(a) through (2)(e) above and replace secondary element assembly.
3-42
