TM 5-3805-262-20
11-4. LIFT CYLINDER ASSEMBLIES MAINTENANCE (CONT)
b. Replacement.
This task covers removal and installation of lift cylinder as-
semblies.
TOOLS: No. 1 Common Organizational Maintenance Tool Kit
Hand hammer, three pounds
L u b r i c a t i n g k it
Combination box and open end wrench set
Torque wrench, 3/4 inch drive
Automotive Mechanic’s Tool Kit
Socket wrench set, 1/2 inch drive
No. 2 Common Organizational Maintenance Tool Kit
Adapter, socket wrench, 1/2 inch male to 3/4 inch female
Chain hoist equipped with nylon straps
Rod, 1-7/8 inches diameter
Torque wrench multiplier, 2000 lb-ft capacity
MATERIALS/PARTS: Clean cloths (Appendix C, item 1)
Cleaning solvent P-D-680 (Appendix C, item 2)
Loctite 242 (blue) (Appendix C, item 18)
REFERENCE: LO 5-3805-262-12
NOTE
PRELIMINARY PROCEDURE: Bucket rolled all the way forward and resting on
ground as shown, front access door opened, hydraulic reservoir fill cap
l o o s e n e d ,
c o n t r o l l e v e r s o p e r a t e d i n b o t h d i r e c t i o n s t o r e l i e v e
hydraulic pressure, and left and/or right fender removed (page 9-24).
11-65
