TM 5-3805-262-34
DISASSEMBLY
In following step, remove im-
peller using jaw-type puller
only. Prying against impeller
(1) or housing (5) will damage
parts.
(1)
(2)
(3)
(4)
Using jaw-type puller, remove
impeller (1) from bearing as-
sembly (4) shaft.
Remove and discard seat (2).
Pry seal assembly (3) from housing (5) using screwdriver. Discard seal
assembly (3).
Remove bearing assembly (4) from housing (5) using hydraulic press bear-
ing on straight shaft of bearing assembly (4).
3-197
