TM 5-3805-262-34
DISASSEMBLY (SHEET 2 OF 2)
(7)
Remove piston assembly (5 thru 11) from body (12).
(8) Remove and discard O-ring (4) from piston (11).
(9) Remove valve body (12) from vise.
(10) Put drive pin punch with flat point in vise. End of punch must be small
enough to fit inside small end of piston (11).
(11) Position piston (11) over drive pin punch, wide end down. Push down on
guide (6) to compress spring (7).
(12) Pull valve (5) from valve stem (9).
(13) Remove guide (6) from spring (7).
(14) Remove spring (7) from piston (11).
(15) Push valve stem (9) against plug (8) to remove plug (8) from piston (11).
(16) Remove valve stem (9) from piston (11).
(17) Remove and discard O-ring (10) from plug (8).
3-453
