TM 5-3805-262-34
FINAL REASSEMBLY
(1)
(2)
(3)
(4)
(5)
Position brake treadle mounting plate on brake valve and aline mounting
holes.
Install and tighten three lock washers (5) and capscrews (4).
Position brake treadle (3) on mounting plate.
Install fulcrum pin (2) through holes in brake treadle (3) and mounting
plate. Aline hole in fulcrum pin with hole in brake treadle boss.
Using hammer, install roll pin (1) through hole in brake treadle (3) boss
and into fulcrum pin (2).
3-451