TM 5-3805-262-34
3-19. BODY AND CAB MAINTENANCE (CONT)
e. Cab Glass.
This task covers removal, cleaning, inspection, and installation
of the
TOOLS:
cab glass.
No. 1 Common Organizational Maintenance Tool Kit
Safety glasses
Heavy gloves
Knife
MATERIALS/PARTS:
Clean cloths (Appendix C, item 1)
Detergent (Appendix C, item 4)
Molding (FSCM 10988 PN L35717)
Wear protective goggles and heavy gloves when removing glass. Do not
break glass out of molding (5).
Remove and handle broken glass
carefully. Failure to do so could cause serious injury due to glass
puncturing or cutting your skin.
If you are injured seek medical
attention immediately.
(1)
Pull open molding (5) lock tab all the way around molding (5).
(2)
Peel molding (5) lip away from top of windshield (1). Then peel molding
(5) away from sides of windshield (1).
(3) Push outward at top of windshield (1), then pull up and out to remove
windshield (1).
(4)
Remove rubber molding (5) from cab flange.
(5) Repeat steps (1) through (4) above to remove two cab door windows (2),
two cab side panel windows (3), two rear windows (4), and associated
molding (5).
3-606
