TM 5-3805-262-34
3-19. BODY AND CAB MAINTENANCE (CONT)
d. Seat Assembly. This task covers disassembly, cleaning, inspection, and reas-
sembly of operator’s seat assembly.
TOOLS: No. 1 Common Organizational Maintenance Tool Kit
Safety glasses
Socket wrench set, 3/8 inch drive
MATERIALS/PARTS: Clean cloths (Appendix C, item 1)
Cleaning solvent P-D-680 (Appendix C, item 2)
Adhesive (Appendix C, item 36)
Retaining clip kit (FSCM 76359 PN C5559)
REFERENCE: TM 5-3805-262-20
NOTE
PRELIMINARY PROCEDURE: Operator’s seat
assembly (refer to TM 5-3805-262-20).
DISASSEMBLY
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
Remove and discard retaining clip
Remove edging (2).
removed from seat support
(1).
Carefully peel backrest pad (3) from seat shell (9).
Carefully peel seat cushion pad (4) from seat shell (9).
Remove two capscrews (5) and remove seat adjuster (6) from seat shell (9)
and adjusting rod (7).
Remove
Remove
(9).
Remove
adjusting rod (7) from seat adjuster (8).
two capscrews (5) and remove seat adjuster (8) from seat shell
label (10) from backrest pad (3).
3-602
