TM 5-3805-290-10
PREVENTIVE MAINTENANCE CHECKS AND SERVICES (PMCS)
INCLUDING LUBRICATION INSTRUCTIONS - CONTINUED
0012 00
LOCATION
ITEM TO
CHECK/
ITEM
MAN-
NOT FULLY MISSION
SERVICE
NO.
INTERVAL
HOURS
PROCEDURE
CAPABLE IF:
35
After
0.2 Hour Transmission
Oil Level
(Con't)
(HOT
CHECK)
427-B0538A
h.Shut down engine (WP 0005 00).
FRONT AND
LEFT SIDE
a. Check on ground under machine for Class III leaks oil or coolant
36
After
Overall View
evidence of fluid leakage such as oil, are evident. Any fuel leaks
are evident.
coolant, or fuel.
b.Check machine for obvious damage Damage that would impair
that would impair operation.
operation is evident.
a. Check for loose or missing mount-
Bolts are loose or missing.
37
After
MP Bucket (If
Any teeth are missing or
ing bolts at cutting edges and teeth.
Equipped)
worn so that a hole is vis-
Ensure dozer cutting edges and
able. Cutting edge is worn
bucket teeth are not cracked or miss-
beyond wear limits.
ing. Distance between center of
mounting bolt holes and edge of cut-
ting edge must be 2.6 in. (65 mm) or
more. Cutting edges worn beyond
wear limits may be reversed or
replaced. Notify Unit Maintenance.
b.Check for cracked welds.
Cracked welds are evident.
0012 00-25
