TM 5-3805-290-10
PREVENTIVE MAINTENANCE CHECKS AND SERVICES (PMCS)
INCLUDING LUBRICATION INSTRUCTIONS - CONTINUED
0012 00
LOCATION
ITEM TO
CHECK/
ITEM
MAN-
NOT FULLY MISSION
SERVICE
NO.
INTERVAL
HOURS
PROCEDURE
CAPABLE IF:
Check for cracked, bent, or otherwise
Cracks or damage that would
38
After
Forklift Pallet
impair operation is evident.
Forks (If
damaged forks and fork frame.
Equipped)
Quick Coupler, a. Check quick coupler for cracks and Cracks are evident. Wear
39
After
that would impair security of
Tilt Cylinder,
wear in pin area.
coupling is evident.
and Loader
Arm
b.Ensure protective caps are installed If protective caps are miss-
ing, notify Unit Mainte-
on two quick disconnect fittings.
nance.
c. Check for loose hose clamps or leak- Loose hose clamps or Class
ing hydraulic lines on work tool, III leaks are evident.
quick coupler, loader arm, and tilt
cylinder.
d.Ensure tilt cylinder rod is not Damage that would impair
scratched, pitted, gouged, or rusted. operation is evident.
a. Check for loose or missing lug nuts, Two or more lug nuts are
40
After
Left-Front
cracks, and loose rim parts.
missing. Rim parts are loose.
Wheel and Tire
b.Check tread and sidewall for cuts Damage to tire that would
and foreign material in treads. lead to tire failure is evident.
Remove foreign material from
treads.
c. Examine rolling radius of tire to get Tire is flat.
an indication of tire inflation pres-
sure.
d.Look behind tire to ensure axle seal Axle seal is leaking.
is not leaking. A leaking axle seal
will leave streaks of oil on inside of
wheel.
0012 00-26
