TM 5-3805-290-10
PREVENTIVE MAINTENANCE CHECKS AND SERVICES (PMCS)
INCLUDING LUBRICATION INSTRUCTIONS - CONTINUED
0012 00
LOCATION
ITEM TO
CHECK/
ITEM
MAN-
NOT FULLY MISSION
SERVICE
NO.
INTERVAL
HOURS
PROCEDURE
CAPABLE IF:
N OT E
62
After
Platform and
(Con't)
Top of
Use clean water that is low in scale-forming minerals.
Machine
DO NOT use softened water.
(4) Add a 1:1 premixed solution of
antifreeze and distilled water to
bring level up to FULL mark on
coolant overflow tank.
(5) Inspect filler cap for damage to
Gasket is missing or dam-
aged.
cap or cap gasket, foreign
material, and deposits.
(6) Reinstall cap by pushing down
on cap and turning clockwise (to
the right). Push down red tab to
close.
g.Check for evidence of exhaust sys- Any exhaust leaks are evi-
tem leaks. Ensure exhaust stack dent.
mounting is secure.
h.Check precleaner for damage.
Ensure precleaner is securely
installed. If housing has debris up to
FULL mark on bowl, service pre-
cleaner (WP 0014 00).
a. Inspect front and rear windshields
63
After
Cab Exterior
for damage and cleanliness. If dirty,
use windshield cleaning compound
to clean.
b.Inspect front and rear windshield
wipers/washers for damage. Ensure
wiper blades are in good condition.
a. Check for cracks, bends, and broken ROPS/FOPS has cracks,
64
After
ROPS/FOPS
welds.
bends, or broken welds.
b.Inspect 14 ROPS/FOPS mounting Bolts are missing or loose.
bolts at four corners inside cab.
Check for missing or loose bolts.
0012 00-49
