TM 5-3805-290-10
PREVENTIVE MAINTENANCE CHECKS AND SERVICES (PMCS)
INCLUDING LUBRICATION INSTRUCTIONS - CONTINUED
0012 00
LOCATION
ITEM TO
CHECK/
ITEM
MAN-
NOT FULLY MISSION
SERVICE
NO.
INTERVAL
HOURS
PROCEDURE
CAPABLE IF:
Quick Coupler, b.Check for loose hose clamps or leak- Loose hose clamps or Class
61
After
ing hydraulic lines on work tool, III leaks are evident.
(Con't)
Tilt Cylinder,
quick coupler, loader arm, and tilt
and Loader
cylinder.
Arm
OPERATOR
STATION
a. Use left-side ladder and grabhan-
62
After
Platform and
dles to open door. Latch door in
Top of
fully open position against cab wall.
Machine
Climb up onto platform.
b.Ensure hydraulic tank filler cap is Hydraulic tank filler cap is
present and secured with padlock. damaged or missing. Class
III leaks are evident.
Check for damage or leaks.
c. Ensure oil is visible in hydraulic tank Oil is not visible in sight
sight gage.
gage.
WARN I N G
When servicing this machine, performing maintenance,
or disposing of materials such as engine oil, consult your
unit/local hazardous waste disposal center or safety
office for local regulatory guidance. If further informa-
tion is needed, please contact The Army Environmental
Hotline at 1-800-872-3845.
d.If oil is not visible in sight gage, add
0.2 Hour
oil as follows:
(1) Lift tab, turn filler cap one-
quarter turn counterclockwise
(to the left), and remove cap.
0012 00-44
