TM 5-3805-290-23-1
THEORY OF OPERATION - CONTINUED
0003 00
HYDRAULIC SYSTEM - CONTINUED
11.
Control Valve (Tilt).
a.
Hold Position.
(1)
In the HOLD position, the springs (9 and 24) hold spool (25) in the centered position. No pilot oil enters
the control valve through the ports (11 and 22). Any pilot oil in the pilot lines drains through the pilot valve
to the tank. The spool blocks the flow of supply oil in passage (15).
(2)
Passage (15) is common to all control valves in the bank valve. The passage has no outlet. Spool (25)
blocks the flow of pump supply oil until the operator moves the pilot valve.
0003 00-168
