TM 5-3805-290-23-1
TRANSMISSION TESTS, INSPECTIONS, AND ADJUSTMENTS - CONTINUED
0014 00
TRANSMISSION PRESSURES TEST AND ADJUSTMENT - CONTINUED
Transmission Oil Pump Pressure Test
N OT E
Use this procedure to check transmission oil pump pressure.
1.
Remove right side covers to gain access (WP 0107
00).
2.
Install correct hose assembly from pressure gage on
pressure tap (8). Attach opposite end of hose assembly
to 0 to 580 psi (0 to 3,400 kPa) to pressure gage.
427-B0928
3.
Start engine and operate engine at high idle (TM 5-3805-290-10). Observe pressure gage. With oil at normal operating
temperature, transmission oil pump pressure must be within values shown in Table 7.
Table 7. Transmission Oil Pump Pressure.
Pressure Tap
Specification
Actual Pressure
Transmission oil pump
350 25 psi
(2,400 170 kPa)
0014 00-23