TM 5-3805-290-23-1
TRANSMISSION TESTS, INSPECTIONS, AND ADJUSTMENTS - CONTINUED
0014 00
TORQUE CONVERTER STALL TEST - CONTINUED
0014 00
CAU T I ON
DO NOT keep torque converter in full stall condition for more than 30 seconds. After torque converter
stalls, put control in NEUTRAL. Run engine at 1,200 to 1,500 rpm to cool oil. Failure to do so may result in
damage to machine.
4.
Ensure transmission neutralizer override is enabled. Transmission neutralizer override is enabled when transmission
neutralizer override switch is illuminated (TM 5-3805-290-10).
5.
Place shift lever in fourth speed FORWARD. Push accelerator pedal down completely. Allow engine rpm to stabilize
and take reading from tachometer.
6.
Correct stall speed is 2,195 to 2,340 rpm. Stall speed that is low indicates that engine performance is not correct. Wait at
least two minutes with transmission in NEUTRAL before repeating test. If that does not correct the problem, refer to
Troubleshooting Torque Converter or Transmission (WP 0008 00).
0014 00-18