TM 5-3805-290-23-2
FUEL TANK LINES, FITTINGS, AND HOSES REPLACEMENT - CONTINUED
0035 00
REMOVAL - CONTINUED
9.
Remove two bolts (19), washers (20), clips (21), and
spacers (22) that secure hoses (10 and 12).
10.
Remove hoses (10 and 12) from machine.
11.
Remove two grommets (23) from machine.
12.
Remove bolt (24), washer (25), and bracket (26) from
machine.
427-B1831
INSPECTION
1.
Inspect all parts for wear, cracks, abrasion, and corrosion and replace if necessary.
2.
Inspect fuel passages to ensure they are clean and unobstructed.
INSTALLATION
N OT E
Install grommets, clips, washers, and bolts, as noted, when installing fuel hoses on machine.
Remove caps or plugs from fuel component openings as hoses, fittings, and fuel lines are installed.
1.
Install bracket (26), washer (25), and bolt (24) on machine.
2.
Install two grommets (23) on machine.
3.
Position hoses (10 and 12) on machine.
4.
Install two spacers (22), clips (21), washers (20), and bolts (19) on machine to secure hoses (10 and 12).
0035 00-4