TM 5-3805-290-23-2
ENGINE ELECTRONIC CONTROL MODULE (ECM) REPLACEMENT - CONTINUED
0053 00
REMOVE ECM
00053 00
WARN I N G
Ensure battery cables are disconnected before performing this task. Failure to follow this warning may
result in injury to personnel or damage to equipment.
N OT E
Follow troubleshooting procedures in this manual to ensure that replacing the ECM will correct the
problem (WP 0007 00, WP 0008 00, and WP 0009 00).
Ensure that all diagnostic codes are noted before removing ECM.
1.
Disconnect battery cables (WP 0079 00).
2.
Remove bolt (5) and washer (6) from upper side cover
(4).
3.
Remove two bolts (1) and washers (2) from bracket
(3).
4.
Remove upper side cover (4) from machine.
5.
Remove four bolts (7), washers (8), and bottom cover
(9) from machine.
427-B2135
0053 00-4
