TM 5-3805-290-23-2
KICKOUT SENSORS REPLACEMENT - CONTINUED
0057 00
RETURN TO WORK KICKOUT SENSOR REMOVAL
0057 00
1.
Cut and discard tiedown strap (1).
2.
Remove two bolts (2), washers (3), bolts (4), and washers (5) from angle bracket (6).
3.
Remove two bolts (7) and washers (8) from angle bracket (6) and position angle bracket aside.
4.
Disconnect wiring harness (9) from kickout sensor (10).
5.
Remove kickout sensor (10) from machine.
427-B0225L
RETURN TO WORK KICKOUT SENSOR INSTALLATION
1.
Install kickout sensor (10) on machine.
2.
Connect wiring harness (9) to kickout sensor (10).
3.
Position angle bracket (6) on machine and loosely install new tiedown strap (1).
4.
Position kickout sensor (10) with angle bracket (6) and install two washers (3) and bolts (2) in angle bracket.
5.
Install two washers (5) and bolts (4) in angle bracket (6).
6.
Install two washers (8) and bolts (7) in angle bracket (6).
7.
Tighten tiedown strap (1).
8.
Verify correct operation of return to work kickouts (TM 5-3805-290-10).
0057 00-2