TM 5-3805-290-23-2
NATO SLAVE RECEPTACLE REPLACEMENT - CONTINUED
0080 00
REMOVAL - CONTINUED
5.
Remove bottom bolt (15), washer (16), and disconnect
cable (7) from NATO slave receptacle (4).
427-B2041
INSTALLATION
1.
Install cable (7), washer (16), and bolt (15) on NATO slave receptacle (4).
2.
Install plate (13) and NATO slave receptacle (4) in battery box (14).
3.
Install eight washers (9), four bolts (8), nuts (10), cover (11), and tether (12) on NATO slave receptacle (4).
4.
Connect cable (7) and install washer (6) and bolt (5) on machine.
5.
Connect two cables (3) and install two washers (2) and bolts (1) on NATO slave receptacle (4).
6.
Connect battery cables to batteries (WP 0077 00).
7.
Start engine and verify correct operation of starting system (TM 5-3805-290-10).
END OF WORK PACKAGE
0080 00-3/(0080 00-4 Blank)