TM 5-3805-290-23-2
IMPLEMENT HOSES, LINES, AND FITTINGS REPLACEMENT - CONTINUED
0131 00
REMOVAL - CONTINUED
Tilt Cylinder
1.
Disconnect hoses (92 and 93) from tilt cylinder (WP
2.
Disconnect hoses (92 and 93) from two lines (94) and
remove hoses from machine.
3.
Remove and discard two O-rings (95).
4.
Remove bolt (96), washer (97), and nut (98) from
clamp (99) and remove clamp from machine.
427-B1136
5.
Disconnect line (94) from fitting (100) and remove
line from machine.
6.
Remove and discard O-ring (101).
7.
Remove bolt (86), washer (87), and nut (88) from
clamp (89) and remove clamp from machine.
8.
Remove fitting (100) from bracket (102).
427-B1137
0131 00-10