TM 5-3805-290-23-2
IMPLEMENT HOSES, LINES, AND FITTINGS REPLACEMENT - CONTINUED
0131 00
REMOVAL - CONTINUED
Lift Cylinders - Continued
19.
Disconnect hose (114) from fitting (128) and remove hose from machine.
20.
Remove and discard O-ring (129).
21.
Disconnect hose (130) from dead engine lower valve (131).
22.
Remove fitting (128) from dead engine lower valve (131).
23.
Remove and discard O-ring (132).
24.
Remove hose (133) from fitting (128).
25.
Remove and discard O-ring (134).
26.
Remove four screws (135) and washers (136) and remove fitting (128) from bracket (137).
27.
Remove two nuts (138), washers (139), and bolts (140) from two clamps (141) and remove hoses (112 and 123) from
bracket (137) and remove clamp from machine.
28.
Remove and discard all associated tiedown straps.
29.
Remove bolt (142) from clip (143) and remove hoses (130 and 133) from bracket (144).
30.
Disconnect hose (130) from hydraulic manifold (WP 0136 00) and remove hose from machine.
31.
Disconnect hose (112) from fitting (145) and remove hose from machine.
32.
Remove and discard O-ring (146).
33.
Disconnect hose (123) from fitting (147) and remove hose from machine.
34.
Remove and discard O-ring (148).
35.
Disconnect hose (149) from hose (150).
36.
Remove and discard O-ring (151).
37.
Disconnect hose (152) from hose (153).
38.
Remove and discard O-ring (154).
39.
Remove hoses (150 and 153) from fittings (145 and 147).
40.
Remove fittings (145 and 147) from bracket (144).
41.
Disconnect hoses (150 and 153) from main control valve (WP 0134 00) and remove hoses from machine.
0131 00-14
