TM 5-3805-290-23-2
AIR CONDITIONING/HEATER BLOWER MOTOR REPLACEMENT - CONTINUED
0143 00
INSTALLATION - CONTINUED
18.
Connect AC wiring harness (20) to resistor (22).
19.
Connect AC wiring harness (20) to fan motor (23).
20.
Install washer (19) and nut (18) on motor mount.
Tighten to 71 27 lb-in. (8 3 Nm).
21.
Install washer (17) and bolt (16) on motor mount.
Tighten to 106 27 lb-in. (12 3 Nm).
427-B0741
22.
Install cover (15) on cab.
23.
Install two screws (14) on front of case assembly (3).
Tighten to 106 24 lb-in. (12 3 Nm).
24.
Install three washers (13) and bolts (12) on front of
case assembly (3).
427-B0740
0143 00-9