TM 5-3805-290-23-2
ENGINE WIRING HARNESS REPLACEMENT - CONTINUED
0170 00
REMOVAL - CONTINUED
27.
Disconnect wiring harness (3) from cab harness (28).
28.
Remove wiring harness (3) from machine.
427-B1007
INSTALLATION
1.
Position wiring harness (3) on machine.
2.
Connect wiring harness (3) to cab harness (28).
3.
From left side of machine, install 12 new tiedown straps (27) on wiring harness (3).
4.
Connect wiring harness (3) to starter (26).
5.
Connect wiring harness (3) to compressor (25).
6.
Connect wiring harness (3) to alternator (24).
7.
Connect wiring harness (3) to relay (23).
8.
Connect wiring harness (3) to eight distribution blocks (22).
9.
Connect wiring harness (3) to three relays (21).
10.
Connect wiring harness (3) to sensor (20).
0170 00-5
