TM 5-3805-290-23-2
REAR AXLE TRUNNION SUPPORT REPLACEMENT - CONTINUED
0181 00
REMOVAL - CONTINUED
8.
Remove and discard seal (11) from rear axle trunnion
support (1).
9.
Use bushing driver tool to remove bearing (12) from
rear axle trunnion support (1). Discard bearing.
427-B0223
10.
Remove eight bolts (13), washers (14), and trunnion
(15) from rear axle (10).
427-B0224
INSTALLATION
1.
Clean mating surfaces of trunnion (15) and rear axle (10). Apply a continuous bead of gasket cement on the mating sur-
faces of trunnion and rear axle.
2.
Install trunnion (15) on rear axle (10) with eight washers (14) and bolts (13).
3.
Apply a thin coat of grease on surface of new bearing (12) and new seal (11).
4.
Use bushing driver tool to install new bearing (12) on rear axle trunnion support (1).
5.
Install new seal (11) on rear axle trunnion support (1).
0181 00-3
