TM 5-3805-290-23-2
FRONT TILT LEVER AND LINK REPLACEMENT - CONTINUED
0199 00
REMOVAL - CONTINUED
26.
Using puller assembly, remove and discard bearing
sleeve (35) from remaining end of link assembly (23).
Repeat for opposite side of bore.
427-B0636
INSTALLATION
N OT E
Apply a thin coat of clean oil to all O-rings and seals before installation.
1.
Using puller assembly, install new bearing sleeve (35) to a depth of 0.39 + 0.08 in. (10 + 2.0 mm) into link assembly
(23). Repeat for opposite side of bore.
2.
Use bushing driver set to install new lip seal (34) into
link assembly (23). Repeat for opposite side of bore.
427-B0635
0199 00-10