TM 5-3805-290-23-2
FRONT TILT LEVER AND LINK REPLACEMENT - CONTINUED
0199 00
INSTALLATION - CONTINUED
3.
Using puller assembly, install new bearing sleeve (33)
to a depth of 0.37 + 0.08 in. (9.5 + 2.0 mm) into
remaining end of link assembly (23). Repeat for oppo-
site side of bore.
427-B0634
4.
Use bushing driver set to install new lip seal (32) in
remaining end of link assembly (23). Repeat for oppo-
site side of bore.
5.
Apply grease to all pin bores and lip seals.
427-B0633
0199 00-11