TM 5-3805-291-10
Messenger Reference Guide
SAVE PROFILE
Selecting this option will save the current settings under the operator ID# entered on the screen. The graphical
display will request reads of all the parameters in the list that are external parameters and save these values along
with the current values of the internal parameters.
DELETE PROFILE
Selecting this option will delete the settings for the operator ID# entered on the screen. The graphical display
module will clear out the space for this operator ID# and hence leave space for a new operator ID# to be stored. If
no new operator ID# was entered following a delete of an operator ID#, the graphical display module will not
perform any changes to any settings when exiting the menu.
FACTORY SETTINGS
Selecting this option will recall the factory settings for the machine.
Factory Settings are:
Operator ID Factory Settings
Raise Kickout Cylinder Extension
Language - English
Dump Rate Control Enable Status- Disabled
Units - English
Full Rack Angle Control Enable Stats -
Disabled
Startup Screen Top Level Screen
Dump Stop Snubbing Enable Status -
Time Format 12 Hr
Disabled
Date Format YYY/MM/DD
Neutralizer Operation Mode - Level
Contrast 50%
Neutralizer settings
Lights On 50%
Level operation neutralizer set point 2%
Lights Off 50%
Moderate slope operation neutralizer set
Forward to Reverse Gear 2
point 8%
Aggressive slope operation neutralizer set
Reverse to Forward Gear 2
point 18%
NOTE: It is up to the user or fleet manager to assign the operator a number that is different than any other user on
that particular machine. The operator ID can be anything from 1 to 99999. However, it is up to the graphical display
application to limit the maximum number of different operators, due to memory restrictions. If the total number of
operator profiles have been reached the graphical display will return an error when trying to save another user
profile. Hence, a profile needs to be deleted or overwritten first before storing. The operator can list the existing
user profile ID# by pressing list and then OK once.
0004 00-57
