TM 5-3805-291-10
Operation Section
General Information
Systems Operation Section
i02506417
General Information
SMCS Code: 7347; 7348
Safety
This machine is equipped with the Caterpillar Work
Area Vision System (WAVS). The system may include
one, two, or three cameras. The system has been
set up by the factory or a Caterpillar dealer in order
to provide views which comply with documented
guidelines.
While the system is serviced, be sure to observe
safe access procedures. Ensure that an appropriate
3-point contact system can be safely maintained
g01178357
during the cleaning procedure and/or use of an
Illustration 1
appropriate safety harness.
Display
Notify Unit Maintenance before any adjustments
are made to the system. Any adjustments to the
WAVS by anyone other than a qualified
technician can be detrimental to the specified
purpose of this system.
Due to the environment, the camera lens and the
display screen will require periodic cleaning. The
instructions on how to properly clean the camera lens
and the display are described in the Maintenance
section of the Operation and Maintenance Manual.
IF THE DISPLAY THAT IS USED WITH THIS
SYSTEM WAS PREVIOUSLY INSTALLED ON A
DIFFERENT MACHINE, IT IS IMPORTANT THAT
THE DISPLAY SETTINGS BE RE-CONFIGURED
BY QUALIFIED SERVICE PERSONNEL TO
INSURE PROPER PERFORMANCE IN THE NEW
APPLICATION.
System Overview
g01178360
Illustration 2
Camera Assembly
This machine is equipped with the Caterpillar Work
Area Vision System (WAVS). WAVS is a closed
Marker Line
circuit video monitoring system. WAVS consists of a
178mm (7 inch) LCD color display and may include
Your system may have been configured to show
one, two, or three cameras. The display is mounted
a green horizontal "Marker" line that is shown on
in the machine cab. The cameras are mounted on the
the display. The "Marker" provides a fixed distance
frame of the machine. The location of the camera(s)
reference line from the machine. There are no
is dependant on machine type.
operator controls available in order to adjust the
"Marker" (15). Refer to Illustration 3.
0004 00-62
